Services we offer
Health and Safety
- Machine guarding audits and solution designs
- HAZOPs
- Independent advice
- Assistance with getting Worksafe prohibition notices lifted after an incident.
- JSA and developing safe job methodologies
Working at Heights and Confined Spaces
- We can assist with the planning of work required where ‘Working at Heights’ or working in ‘Confined spaces’ is required.
- We have trained staff and can perform inspections, testing, and assessments in a variety of locations where ‘Working at Heights’ or working in ‘Confined spaces’ is required.
- Able to inspect and test Anchor points used for ‘Working at Heights’
Insurance Investigations
- Support to identify the cause of failure or consequential damage for a variety of equipment, buildings or industrial structures.
- Advice on the extent of damage to equipment and options for reinstatment
- Cost estimates for replacement and reinstatement of mechanical systems and building services
Pressure Piping design
- Steam lines, heating systems, process pipework (hazardous and non-hazardous).
- We can design new piping system, modifications to existing or design check piping already in place.
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the PECPR regulations to pressure codes ASME B31.1 & B31.3
- Seismic resilience to NZ codes
- Able to obtain Design Verification for pressure piping.
- Prepare pipework drawings that can be used for design checks, used for construction and for As-built records.
Pressure Vessel design
- Vessels are used for Brewing, Product storage, Buffer tanks, and Heat exchangers. (hazardous and non-hazardous).
- We can design new vessels, modifications to existing or design check vessels that are already in place (As-built).
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the PECPR regulations to pressure codes ASME VIII
- Seismic resilience to NZ codes
- Able to obtain Design Verification for pressure vessels.
- Vessel drawings that can be used for design checks, used for construction and for As-built records.
Tank design
- Large tanks that are used for Product storage (hazardous and non-hazardous).
- Smaller tanks that are used for Product storage, Buffer tanks, Process tanks, and Petrochemical & chemical storage tanks.
- We can design new tanks, modifications to existing or design check tanks that are already in place (As-built).
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the API 650 and other codes.
- Seismic resilience to NZ codes
Mechanical design
- Able to design Equipment used in a variety of applications.
- Machine guarding. Assessment, review of existing, design of new guards.
- Seismic supports for equipment.
- Simple support structures for process equipment, pipework, and tanks.
- Access walkways and ladders to the NZ Building codes and to AS 1657.
- Lifting beams, Monorails and Cranes
Process design
- Space planning, material handling and facility layouts
- Energy & mass balance for a variety of process
- Heating and cooling systems
- Equipment selection for Pump, heat exchanger and heating & cooling equipment,
CAD drafting & Modelling
- We can provide quality drawings for a variety of purposes. Drawings can be used to fabricate and construct from, Obtaining consent and As-built records.
- Drawings are created using AutoCAD for 2D, Inventor and Revit MEP for 3D models and drawings.
Building services design (Mechanical vent & HVAC)
- Education - classroom ventilation, school heating systems, boiler replacements, specialist teaching spaces (cooking, woodworking etc.)
- Education - classroom ventilation, school heating systems, boiler replacements, specialist teaching spaces (cooking, woodworking etc.)
- Healthcare – Clinics, treatment rooms, patient rooms, care homes.
- High-end residential – Heating & Cooling design, ventilation.
- Offices & workplaces - Heating & Cooling design, ventilation.
- Museums and spaces with specific environmental conditions to be maintained.
- HVAC (Heating Ventilation and Air Conditioning).
- Distributed heating using central boilers and distributing heat via Low Temperature Hot Water piping (LTHW).
- Hydraulic systems (potable hot and cold water)
- H1 Energy efficiency reports supporting a building consent application.
- G4 Ventilation design and documentation supporting a building consent application.
- Cad drawings using 2D or 3D Revit formats
Project management
- Small to medium projects of a mechanical or process nature
- We can create a customise a design team for a specific project using our network of other specialist engineers. We can include Structural Engineering, Geotechnical, Foundation design, Electrical Engineering and Chemical engineering.
Contract administration
- Creating tender documents and technical specifications
- Tendering, evaluation and providing recommendations
- Contract administration and
- Construction supervision
Health and Safety
- Machine guarding audits and solution designs
- HAZOPs
- Independent advice
- Assistance with getting Worksafe prohibition notices lifted after an incident.
- JSA and developing safe job methodologies
Working at Heights and Confined Spaces
- We can assist with the planning of work required where ‘Working at Heights’ or working in ‘Confined spaces’ is required.
- We have trained staff and can perform inspections, testing, and assessments in a variety of locations where ‘Working at Heights’ or working in ‘Confined spaces’ is required.
- Able to inspect and test Anchor points used for ‘Working at Heights’
Insurance Investigations
- Support to identify the cause of failure or consequential damage for a variety of equipment, buildings or industrial structures.
- Advice on the extent of damage to equipment and options for reinstatment
- Cost estimates for replacement and reinstatement of mechanical systems and building services
Pressure Piping design
- Steam lines, heating systems, process pipework (hazardous and non-hazardous).
- We can design new piping system, modifications to existing or design check piping already in place.
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the PECPR regulations to pressure codes ASME B31.1 & B31.3
- Seismic resilience to NZ codes
- Able to obtain Design Verification for pressure piping.
- Pipework drawings that can be used for design checks, used for construction and for As-built records.
Pressure Vessel design
- Vessels are used for Brewing, Product storage, Buffer tanks, and Heat exchangers. (hazardous and non-hazardous).
- We can design new vessels, modifications to existing or design check vessels that are already in place (As-built).
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the PECPR regulations to pressure codes ASME VIII
- Seismic resilience to NZ codes
- Able to obtain Design Verification for pressure vessels.
- Vessel drawings that can be used for design checks, used for construction and for As-built records.
Tank design
- Large tanks that are used for Product storage (hazardous and non-hazardous).
- Smaller tanks that are used for Product storage, Buffer tanks, Process tanks, and Petrochemical & chemical storage tanks.
- We can design new tanks, modifications to existing or design check tanks that are already in place (As-built).
- Condition assessment, measure in place, create as-built documentation
- Design in accordance with the API 650 and other codes.
- Seismic resilience to NZ codes
- Able to provide Design Certificates for tank design.
Mechanical design
- Able to design Equipment used in a variety of applications.
- Machine guarding. Assessment, review of existing, design of new guards.
- Seismic supports for equipment.
- Simple support structures for process equipment, pipework, and tanks.
- Access walkways and ladders to the NZ Building codes and to AS 1657.
- Lifting beams, Monorails and Cranes
Process Design
- Space planning, material handling and facility layouts
- Energy & mass balance for a variety of process
- Heating and cooling systems
- Equipment selection for Pump, heat exchanger and heating & cooling equipment,
- Space planning and layouts